• English
  • Español
  • United States
  • Česky
  • Pусский

ZENITH C - Technical parameters

Technical specifications  
   
 General parameters
 Type ZENITH C
 Band 80 GHz
 Band License free / Light licensed / Licensed
 Frequency range (GHz) 71 - 76 / 81 - 86 
 Duplex spacing (GHz) 10
 Channel bandwidth (MHz) 250 / 500
 Modulation scheme QPSK - 256 QAM
 Transmission capacity (Mbps) 2600 full duplex
 Frequency stability  < 10 ppm 
 Forward error correction FEC Reed-Salomon 
 System configurations 1+0, 1+1, 2+0
 Radio Parameters
 Receiver sensitivity for 10-6 (dBm)  
 Output power max.(dBm) up to 20 based on modulation used
 Automatic power control ATPC
 ACM Hitless ACM
 User interfaces
 Ethernet interfaces 1× 1000Base-T, 1× 1000 Base-X + 1x 2500Base-X or 10000Base-X
 Maximal packet length 9600 bytes 
 Supports Auto Negotiation or manual setting 1000 / 100 / 10 and Full / Half Duplex, Flow Control, Auto MDIX, Master / Slave
 Control and diagnostic system
 Management port In-band GUI
 Supports  SNMPv1, SNMPv2, SNMPv3
 ODU connection
 Cable type  S-STP/S-FTP Cat.7 cable is conected to cutting strips “KRONE” both in ODU and protected terminal box
 Cable length  Up to 90 m for Ethernet 1000Base-T, up to 100 m for 100Base-TX and up to 250 m for 10Base-T
 Optical cable  Fibre optic cable is determinated by used SFP module
 Antennas
 0.35 m gain mid band (dBi) 45.5
 0.65 m gain mid band (dBi) 51
 Class ETSI Class 2
 Polarization Vertical or horizontal
 Power supply
 Power supply 48 V DC (36-72)
 Power consumption Up to 36 W
 Temperature range
 Outdoor unit -35 to +55 °C
 Protected terminal box -25 to +55 °C
 Dimensions (w x h x d) and weight
 Outdoor unit 22 × 28 × 16.5  cm / 5.9 kg
 Protected terminal box 4.7 × 16.3 × 4.4 / 0.5 kg
 Antenna 0.35 m 8.1 kg
 Antenna 0.65 m 11 kg
   
ZENITH C brochure